Power Circuit Inspection

Ignition "ON" & Engine "OFF".
Measure the voltage between terminal 30 of the fuel pump relay connector and chassis ground.
Measure the voltage between terminal 85 of the fuel pump relay connector and chassis ground.
Specification: Approx. B+

Fig 1: Measuring Voltage Between Terminal 85 And 30 Of Fuel Pump Relay Connector And Chassis Ground
Courtesy of HYUNDAI MOTOR CO.
Is voltage within the specification?
YES
- Go to "CONTROL CIRCUIT INSPECTION " procedure
NO
- Check for an open or short to ground in the power supply circuit. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.