Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2009 >> Azera GLS >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer Control System >> DTC Codes >> DTC P1699 Immobilizer-Twice OVERTRIAL >> Monitor DTC Status

Monitor DTC Status

  1. Connect scantool to Data Link Connector (DLC).
  2. Ignition "ON" & engine "OFF"
  3. Select "Diagnostic Trouble Codes (DTCs)" mode and monitor "DTC Status" parameter
  4. Is the DTC P1699 present?

    YES 

    • Go to "Inspection & Repair" procedure

    NO 

    • Fault is intermittent caused by poor contact in SMARTRA's and/or ECM's connector or was repaired and ECM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About Mike's Workshop Manuals