Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2008 >> Veracruz SE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> BCM (Body Control Module) >> BCM (Body Control Module) >> DTC B1907 Rain Sensor Fault3 >> DTC Description

DTC Description

This code is set if the rain sensor doesn't receive message from BCM or BCM detects abnormal signal from rain sensor during IG KEY "ON" & wiper switch "AUTO".

Possible cause is as below;

  1. When the rain sensor is shoot after detached from front glass.
  2. Input or output signal line of the rain sensor open circuited.
  3. Disconnected rain sensor connector.
  4. Input or output signal line of the rain sensor short to ground.