Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2008 >> Veracruz GLS, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 2) >> DTC Troubleshooting Procedures >> DTC P2068 Fuel Level Sensor "B" Circuit High Input >> Ground Circuit Inspection >> Check Open In Harness

Check Open In Harness

  1. IG "OFF" and disconnect Instrument cluster connector and Fuel Level Sender A & Fuel Pump Motor connector.
  2. Measure resistance between ground terminal of Fuel Level Sender A harness connector and Fuel ground terminal of Instrument cluster harness connector.

    Specification : Below 1Ω

  3. Is the measured resistance within specification ?

    YES: 

    NO: