Ground Circuit Inspection

Ignition "OFF"
Disconnect PCM connector.
Measure resistance between terminals 1 of the OTS harness connector and 76 of the PCM harness connector.
Specification: Approx. OΩ

Fig 1: Measuring Resistance Between Terminal 1 OTS Harness Connector And 76 Of PCM Harness Connector
Courtesy of HYUNDAI MOTOR CO.
Is resistance within the specification?
YES : --> Go to "TERMINAL AND CONNECTOR INSPECTION " procedure.

NO : --> Repair short to ground in harness and go to "VERIFICATION OF VEHICLE REPAIR " procedure.