Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2008 >> Tucson GLS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G4GC - GSL 2.0) >> DTC Troubleshooting Procedures >> DTC P0112 Intake Air Temperature Sensor 1 Circuit Low Input >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Ignition "OFF".
  2. Disconnect IATS connector.
  3. Measure resistance between terminal 5 of the sensor harness connector and chassis ground.

    Specification: Infinite

    Fig 1: Scantool Display - INT. AIR TEMP. SNSR (V)
    G04810691Courtesy of HYUNDAI MOTOR CO.
  4. Is resistance within the specification?

    YES  : --> Go to "TERMINAL AND CONNECTOR INSPECTION " procedure.

    NO  : --> Repair short to ground in harness and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About Mike's Workshop Manuals