| C1513 |
[Open, short to BATT/GND, switch trouble]
- If both BLS and BS have a same state and MCP > 20bar for 500ms, The failure is recognized.
- Outside an ABS/TCS/ESC control, and after normal operation of MCP, If the pressure sensor signal is higher than 20bar and BLS is low for 3sec, The failure is recognized.
- If the BLS/BS changed more than 40 times and MCP > 20bar for 5sec, The failure is recognized.
- While Vref > 10KPH, TPS > 5%, MCP < 7bar, if BLS is high over 1 minute, The failure is recognized.
|
- Brake switch Open, short to GND
- Faulty brake switch
- Faulty HECU
|