| C1260 |
[Offset error, stick]
- The STN is low more than +/- 20 degrees for 70msec.
- When the steering wheel is turned more than 370+/-5 degrees, If center is not detected, ECU detects the failure.
- When the steering wheel angle is larger than 700 degrees ECU detects the failure.
- During straight driving, If the steering wheel angle is larger than 55+/-5 degree ECU detects the failure.
- When the curve is detected after driving straight, If there is no variation of the steering wheel angle for 3sec, ECU detect the failure.
- While the vehicle drive 60+/-5 degrees <--> - 60+/-5 degrees, If STN is not detected low, ECU detects the failure.
- While steering angle sensor wheel through center, If steering angle sensor is against specification three times, ECU detect the failure.
- When the curve is detected after driving straight, if estimated value and measured value of the sensor indicate in the opposite direction for 2 times.
|
- Open/short in circuit of steering angle sensor
- Faulty steering angle sensor
- Faulty installing of steering angle sensor
- Faulty HECU
|