Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2008 >> Entourage GLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Front Axle) >> Front Axle >> Front Hub / Knuckle >> Installation

Front Hub / Knuckle: Installation

WARNING: This page is about a different car, the 2007 Hyundai Entourage. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is the reverse of removal.
CAUTION:
  • The driveshaft lock nut should be replaced with new ones.
  • After installation driveshaft lock nut, stake the lock nut using a chisel and hammer as shown in the illustration below.
Fig 1: Staking Lock Nut Using Chisel And Hammer
G05322522Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About Mike's Workshop Manuals