Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2008 >> Accent GLS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 2) >> DTC Troubleshooting Procedures >> DTC P0136 Ho2S Circuit (Bank 1/Sensor 2) >> Ground Circuit Inspection

Ground Circuit Inspection

  1. IG "OFF".
  2. Disconnect HO2S (B1/S2) connector.
  3. Measure resistance between terminal 1 of HO2S (B1/S2) and chassis ground.

    Specification: Approx. below 1Ω

  4. Is the measured resistance within specification?

    YES  : --> Go to "COMPONENT INSPECTION " procedure.

    NO  : --> Repair or replace as necessary and then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About Mike's Workshop Manuals