Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Veracruz GLS, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 2) >> DTC Troubleshooting Procedures >> DTC P0553 Power Steering Pressure Sensor/Switch Circuit High Input >> Ground Circuit Inspection >> Check Open In Harness

Check Open In Harness

  1. IG Key "OFF".
  2. Disconnect the P/S pressure sensor connector.
  3. IG Key "ON".
  4. Measure the voltage between power terminal of P/S pressure sensor harness connector and chassis ground. (Measurement "A")
  5. Measure the voltage between power and ground terminals of P/S pressure sensor harness connector. (Measurement "B")

    Specification : The Difference between "A" and "B" is below 200mV.

  6. Is the measured voltage within specification ?

    YES: 

    NO: 

scientia non olet · About Mike's Workshop Manuals