Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Veracruz GLS, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 2) >> DTC Troubleshooting Procedures >> DTC P0198 Engine Oil Temp. Sensor High Input >> Ground Circuit Inspection >> Check Open In Harness

Check Open In Harness

  1. IG "OFF" & ENG "OFF"
  2. Disconnect OTS connector and IG "ON"
  3. Measure voltage between signal terminal of OTS harness connector and chassis ground. (Measurement "A")
  4. Measure voltage between signal and ground terminals of OTS harness connector. (Measurement "B")

    Specification : Measurement "A" - Measurement 'B' = Approx. below 200mV

  5. Is the measured voltage within specification ?

    YES: 

    NO: 

scientia non olet · About Mike's Workshop Manuals