Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Veracruz GLS, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 2) >> DTC Troubleshooting Procedures >> DTC P0113 Intake Air Temperature Sensor1 Circuit High Input >> Ground Circuit Inspection >> Check Open In Harness

Check Open In Harness

  1. IG "OFF" and disconnect IATS connector and then IG "ON".
  2. Measure voltage between signal terminal of IATS harness connector and chassis ground. (Measurement "A")
  3. Measure voltage between signal and ground terminals of IATS harness connector. (Measurement "B")

    Specification : Voltage difference between measurement "A" and "B" is below 200mV.

  4. Is the measured voltage within specification ?

    YES: 

    NO: 

scientia non olet · About Mike's Workshop Manuals