Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Tucson SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G6BA - GSL 2.7) >> DTC Troubleshooting Procedures >> DTC P0463 Fuel Level Sensor "A" Circuit High Input >> Signal Circuit Inspection >> Notes

Signal Circuit Inspection: Notes

  1. Ignition "ON" & Engine "OFF".
  2. Measure voltage between terminal 2 of the FLS harness connector and chassis ground. 1)

    Specification: Approx. 0V

    Fig 1: Measuring Voltage Between Terminal 2 Of FLS Harness Connector And Chassis Ground
    G04810500Courtesy of HYUNDAI MOTOR CO.
  3. Is resistance within the specification?

    YES  : --> Go to next step as below.

    NO  : --> Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About Mike's Workshop Manuals