Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Tucson SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G6BA - GSL 2.7) >> DTC Troubleshooting Procedures >> DTC P0453 EVAP. Emission System-Pressure Sensor High Input >> Signal Circuit Inspection >> Notes

Signal Circuit Inspection: Notes

  1. Ignition "ON" & Engine "OFF".
  2. Measure voltage between terminal 1 of the FTPS harness connector and chassis ground.

    Specification: Approx. 0V

    Fig 1: Measuring Voltage Between Terminal 1 Of FTPS Harness Connector And Chassis Ground
    G04810484Courtesy of HYUNDAI MOTOR CO.
  3. Is voltage within the specification?
    1. YES  : --> Go to next step as below.

      NO  : --> Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.