DTC P0335 Crankshaft Position Sensor A Circuit: DTC Detecting Condition

DTC DETECTING CONDITION

Item		Detecting Condition & Fail Safe	Possible Cause
DTC Strategy		Check Crankshaft Signal Switching	Open or short in signal, ground or power supply circuit Contact resistance in connectors Damage to the connecting flange/flywheel Misadjusted crankshaft and camshaft pulley position Faulty CKP sensor
(Case1)	Enable Conditions	Before Synchronization
	Threshold Value	Valid Crankshaft Teeth not yet detected with Camshaft Signal Can not detect TDC with valid Crankshaft Teeth and Camshaft Signal
	Diagnostic Time	4 revolutions
(Case2)	Enable Conditions	After Synchronization
	Threshold Value	Number of Crankshaft Teeth is not correct
	Diagnostic Time	5 revolutions
MIL On Condition		2 Driving Cycles