Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Tiburon SE >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Immobilizer Control System >> Immobilizer Control System >> DTC 6 ECM Not Detected >> Terminal And Connector Inspection

Terminal And Connector Inspection

  1. Many malfunctions in the electrical system are caused by poor harness and terminals.

    Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.

  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Has a problem been found?

    YES 

    Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    Go to "POWER CIRCUIT INSPECTION " procedure.

scientia non olet · About Mike's Workshop Manuals