Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Tiburon GS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G4GC-GSL 2.0L) >> DTC Troubleshooting Procedures >> DTC P0335 Crankshaft Position Sensor A Circuit >> DTC Detecting Condition

DTC P0335 Crankshaft Position Sensor A Circuit: DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item Detecting Condition Possible Cause
DTC Strategy
  • Check camshaft signal switching
  • Open or short in signal, ground or power supply circuit
  • Contact resistance in connectors
  • Damage to the connecting flange/flywheel
  • Misadjusted crankshaft and camshaft pulley position
  • Faulty CKP sensor
Enable Conditions
  • Camshaft position sensor signal is valid
  • 6V & Battery voltage < 16V
Case 1) Threshold Value
  • No Crankshaft Teeth detected after 4 Camshaft signal transitions
  • Crankshaft teeth detected but synchronization is not successful
Diagnosis Time
  • 2 revolutions
Case 2) Threshold Value
  • Number of Crankshaft Teeth is not correct
Diagnosis Time 2.5 revolutions
Mil On Condition
  • 2 Driving Cycles
scientia non olet · About Mike's Workshop Manuals