Replacing Etc Body

After replacing ETC body or ECM, a new TPS adaptation has to be preformed as below procedures.

Clear the previous TPS adaptation value using Hi-Scan (Pro).

Fig 1: Hi-Scan Display - RESETTING ADAPTIVE VALUES
Courtesy of HYUNDAI MOTOR CO.

Fig 2: Hi-Scan Display - RESETTING ADAPTIVE VALUES
Courtesy of HYUNDAI MOTOR CO.
Turn the ignition switch off, and then turn it on.
Wait for 10 sec. until TPS adaptation finishes.

CAUTION: A new TPS adaptation has to be performed under environmental conditions as below.

Battery voltage > 10V
Air temperature > 5.3°C
5.3°C < Coolant temperature < 99.8°C