Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Santa Fe Limited, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Power Windows >> Power Windows >> Power Window Motor >> Inspection >> Front Power Window Motor

Front Power Window Motor

  1. Remove (-) negative battery terminal.
  2. Remove the front door trim. (Refer to the FRONT DOOR )
  3. Disconnect the connector (2P) from the motor.
    Fig 1: Identifying Front Power Window Motor Connector Terminals
    G05353412Courtesy of HYUNDAI MOTOR CO.
  4. Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.
    Fig 2: Front Power Window Motor Connector Terminals Connection Reference Chart
    G05332061Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About Mike's Workshop Manuals