Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Santa Fe Limited, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> ETACS (Electronic Time And Alarm Control System) >> ETACS (Electronic Time And Alarm Control System) >> Body Control Module >> Replacement

Body Control Module: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (A). Avoid damaging retaining clip. (Refer to the CRASH PAD )
    Fig 1: Identifying Crash Pad Lower Panel
    G05353330
  3. Remove the body control module (A) and antenna cable after loosening 3 bolts and disconnecting connector.
    Fig 2: Locating Body Control Module
    G05353331
  4. Installation is the reverse of removal.
scientia non olet · About Mike's Workshop Manuals