Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Santa Fe GLS, AWD, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G6EA-GSL 2.7) >> Gasoline Engine Control System >> Purge Control Solenoid Valve (PCSV) >> Inspection >> Component Inspection

Component Inspection

  1. Turn ignition switch OFF.
  2. Disconnect PCSV connector.
  3. Measure resistance between PCSV terminals 1 and 2.
    Fig 1: Measuring Resistance Between PCSV Terminals 1 And 2
    G05348911Courtesy of HYUNDAI MOTOR CO.
  4. Check that the resistance is within the specification.

    Specification: Refer to SPECIFICATION .

scientia non olet · About Mike's Workshop Manuals