Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Santa Fe GLS, AWD, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> ESC (Electronic Stability Control) System >> Esp/ESC System >> DTC C1623 Can Time-Out Steering Angle Sensor >> Ground Circuit Inspection >> Notes

Ground Circuit Inspection: Notes

  1. Ignition "OFF".
  2. Disconnect SAS connector.
  3. Measure resistance between terminal "1" of the steering angle sensor harness connector and chassis ground.

    Specification : Approx. below 1 Ω

    Fig 1: Measuring Resistance Between Terminal 1 Of Steering Angle Sensor Harness Connector And Chassis Ground
    G04880975Courtesy of HYUNDAI MOTOR CO.
  4. Is the measured resistance within specifications?

    YES 

    NO 

    • Check for damaged harness and poor connection between terminal "15" of the HECU harness connector and terminal "1" of the steering angle sensor harness connector. Repair as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About Mike's Workshop Manuals