Ground Circuit Inspection

Check open in ground circuit.
1. Ignition "ON" & engine "OFF".
2. Measure the resistance between Right turn signal lamp ground circuit (E25-3) and chassis ground.
  Specification : 0 Ω
  
  Fig 1: Measuring Resistance Between Right Turn Signal Lamp Ground Circuit (E25-3) And Chassis Ground
  Courtesy of HYUNDAI MOTOR CO.
3. Is the measured resistance within the specification?
  YES
  
  Go to "COMPONENT INSPECTION ".
  
  NO
  
  Repair open to ground in power circuit and go to "VERIFICATION OF VEHICLE REPAIR ".