Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Elantra GLS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G4GC-GSL 2.0) >> DTC Troubleshooting Procedures >> DTC P0136 Ho2S Circuit (Bank 1/Sensor 2) >> Ground Circuit Inspection

Ground Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect HO2S connectors
  3. Measure resistance between terminals 1 of the sensor harness connector and chassis ground

    Specification : Approx. 0Ω

  4. Is resistance within the specification?

    YES 

    NO 

    NOTE: HO2S must have a clean air reference to function properly. The air is obtained by way of the sensor wire (s). Do not attempt to repair the wire (s), connector, or the terminals.
scientia non olet · About Mike's Workshop Manuals