Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Elantra GLS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G4GC-GSL 2.0) >> DTC Troubleshooting Procedures >> DTC P0102 Mass Or Volume Air Flow Circuit Low Input >> Power Circuit Inspection

Power Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect MAF sensor connector
  3. Ignition "ON" & Engine "OFF"
  4. Measure voltage between terminal 2 of the sensor harness connector and chassis ground

    Specification : Approx. B+

  5. Is voltage within the specification?

    YES 

    NO 

    • Check for an open or short to ground in the power supply circuit between the MAF sensor and main relay. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure
scientia non olet · About Mike's Workshop Manuals