Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Elantra GLS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (A4CF2) >> Automatic Transaxle System >> DTC P0708 Transaxle Range Switch - High Input >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Ignition "OFF".
  2. Disconnect "TRANSAXLE RANGE SWITCH" and TCM (PCM)" connector.
  3. Measure resistance between each terminals of the sensor harness to check for Short.

    Specification : Infinite

    Fig 1: Measuring Resistance Between Transaxle Range Switch Terminal 2 And Terminal 7
    G05364086
  4. Is resistance within specifications?

    YES 

scientia non olet · About Mike's Workshop Manuals