Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Elantra GLS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (A4CF2) >> Automatic Transaxle System >> DTC P0707 Transaxle Range Switch - Low Input >> DTC Detecting Condition

DTC P0707 Transaxle Range Switch - Low Input: DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item Detecting Condition Possible cause
DTC Strategy 
  • Check for no signal
  • Open or short in circuit
  • Faulty Shift cable adjustment
  • Faulty Inhibitor switch and Manual control lever position adjustment
  • Faulty TRANSAXLE RANGE SWITCH
  • Faulty TCM (PCM)
Enable Conditions 
  • Engine Speed ≥ 1200rpm
  • Battery Voltage ≤ 10V
Threshold value 
  • No signal detected
Diagnostic Time 
  • More than 30 sees
Fail Safe 
  • Recognition as previous signal.
  • When P-D or R-D or D-R SHIFT is detected, it is regarded as N-D or N-R though "N" signal is not detected
scientia non olet · About Mike's Workshop Manuals