Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2007 >> Azera GLS >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine (G6DB/G6DA-GSL 3.3/3.8) >> Cooling System >> Engine Coolant Refilling And Bleeding >> Cap Testing

Cap Testing

  1. Remove the radiator cap, wet its seal with engine coolant, then install it no pressure tester.
    Fig 1: Identifying Radiator Cap Onto Pressure Tester
    G04801319Courtesy of HYUNDAI MOTOR CO.
  2. Apply a pressure of 93 ~ 123 kPa (0.95 ~ 1.25 kgf/cm2 , 14 ~ 19 psi)
  3. Check for a drop in pressure.
  4. If the pressure drops, replace the cap.
scientia non olet · About Mike's Workshop Manuals