Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2006 >> Tucson GLS, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G6BA - GSL 2.7) >> DTC Troubleshooting Procedures >> DTC P0113 Intake Air Temperature Sensor 1 Circuit High Input >> Ground Circuit Inspection

Ground Circuit Inspection

  1. Ignition "OFF".
  2. Disconnect ECM connector.
  3. Measure resistance between terminal 2 of the IAT sensor harness connector and 23 of the ECM harness connector.

    Specification: Approx. 0Ω

    Fig 1: Measuring Resistance Between IAT Sensor Harness Connector And ECM Harness Connector
    G04810266Courtesy of HYUNDAI MOTOR CO.
  4. Is resistance within the specification?

    YES  : --> Go to "TERMINAL AND CONNECTOR INSPECTION " procedure.

    NO  : --> Repair open circuit and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About Mike's Workshop Manuals