Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2006 >> Elantra Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G4GC-GSL 2.0) >> DTC Troubleshooting Procedures >> DTC P2626 Ho2S Pumping Current Trim Circuit/Open-Bank 1 Sensor 1 >> Pumping Current Circuit Inspection

Pumping Current Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect HO2S and PCM connectors.
  3. Measure resistance between terminals 1 of the sensor harness connector and 41 of the PCM harness connector

    Specification: Approx. 0Ω

    Fig 1: Measuring Resistance Between Terminals 1 Of Sensor Harness Connector And 41 Of PCM Harness Connector
    G04924143Courtesy of HYUNDAI MOTOR CO.
  4. Is resistance within the specification?

    Yes: 

    No: 

scientia non olet · About Mike's Workshop Manuals