DTC P0335 Crankshaft Position Sensor A Circuit: DTC Detecting Condition

DTC DETECTING CONDITION

Item		Detecting Condition	Possible Cause
DTC Strategy		Check camshaft signal switching	Open or short in signal, ground or power supply circuit Contact resistance in connectors Damage to the connecting flange/flywheel Misadjust crankshaft and camshaft pulley position Faulty CKP sensor
Enable Conditions		Camshaft position sensor signal is valid 6V< Battery voltage < 16V
Threshold Value	Case 1	Crankshaft Teeth detected but synchronization not successful No crankshaft teeth during 4 camshaft signal transition
Threshold Value	Case 2	Number of Crankshaft Teeth within one revolution too high or too low (by more than 2)
Diagnosis Time	Case 1	2 revolutions
Diagnosis Time	Case 2	2.5 revolutions