Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2006 >> Accent Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 2) >> DTC Troubleshooting Procedures >> DTC P0647 A/C Clutch Relay Control Circuit High >> Control Circuit Inspection

Control Circuit Inspection

  1. IG "OFF".
  2. Disconnect A/C Relay.
  3. IG "ON".
  4. Measure the voltage between terminal 5 of A/C relay and ground.

    Specification: Approx. 11V

  5. Is the measured voltage within specification?

    YES  : --> Go to "COMPONENT INSPECTION " procedure.

    NO  : --> Repair Short to power in A/C relay control circuit and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About Mike's Workshop Manuals