Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2006 >> Accent Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 2) >> DTC Troubleshooting Procedures >> DTC P0498 EVAP. Emission System-Vent Valve Control Circuit Low >> Control Circuit Inspection

Control Circuit Inspection

  1. Key "OFF".
  2. Disconnect CCV connector.
  3. key "ON".
  4. Measure the voltage between terminal 2 of CCV harness connector and chassis ground.

    Specification: Approx 3.5V

  5. Is the measured voltage within specification ?

    YES  : --> Go to "COMPONENT INSPECTION " procedure.

    NO  : --> Repair Short to ground in control circuit and then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About Mike's Workshop Manuals