Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2006 >> Accent Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 2) >> DTC Troubleshooting Procedures >> DTC P0230 Fuel Pump Primary Circuit >> Control Circuit Inspection

Control Circuit Inspection

  1. Key "OFF".
  2. Disconnect fuel pump relay.
  3. Key "ON".
  4. Measure the voltage between terminal 5 of fuel pump relay harness connector and chassis ground.

    Specification: Approx. 3.5V

  5. Is the measured voltage within specifications?

    YES  : --> Go to "COMPONENT INSPECTION " procedure.

    NO  : --> Repair Open in control circuit, and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About Mike's Workshop Manuals