Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2005 >> Tucson LX, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Replacement >> Cruise REMOCON Switch Replacement

Cruise REMOCON Switch Replacement

  1. Disconnect the battery negative cable, then disconnect the positive cable, and wait at least three minutes.
  2. Remove the driver's airbag (See RESTRAINTS ).
  3. Disconnect the remocon switch connector (A).
  4. Loosen the two mounting screws (B), and remove the cruise remocon switch (C).
    Fig 1: Identifying Remocon Switch Connector, Mounting Screws & Cruise Remocon Switch
    G03762139Courtesy of HYUNDAI MOTOR CO.
  5. Installation is the reverse of removal.
  6. Connect the battery positive cable and negative cable to the battery.
scientia non olet · About Mike's Workshop Manuals