In/Output Shaft Speed Sensor Check
WARNING: This page is about a different variant/trim than selected.
Check the waveform by the scan tool
STANDARD IN/OUTPUT SHAFT SPEED SENSOR VALUE SPECIFICATIONS
| Check item | Standard value | |
|---|---|---|
| Air gap | Input shaft speed sensor | 1.3 mm |
| Output shaft speed sensor | 0.85 mm | |
| Coil insulation resistance | Input shaft speed sensor | Over 1MΩ |
| Output shaft speed sensor | Over 1MΩ | |
| Output voltage | HIGH side | 4.8~5.2 V |
| LOW side | Below 0.8 V |