Spark Plug Cable Inspection
- Remove suspect cylinder's spark plug cable.
- Visually/physically inspect the following items:
- Damage, cracks and flashover.
- Measure the resistance of the spark plug cable referring to specification.
Specification : 5.6kΩ/m +/-20%
NOTE: Resistance should not be higher than 10,000Ω per foot of cable. If resistance is higher than specification, replace the cable. - Is the displayed value within the specified value?
YES
- Go to SPARK PLUG INSPECTION procedure.
NO
- Repair as necessary and go to VERIFICATION OF VEHICLE REPAIR procedure.