| DTC Strategy |
- Monitor deviation between camshaft position setpoint and actual value
|
- Faulty Oil leak
- Faulty Oil pump
- Faulty Intake valve control solenoid
|
| Enable Conditions |
- No relevant failure
- 11V < Battery voltage < 16V
- CVVT control: enabled
- Holding position adaptation not active
- Camshaft setpoint moved more than 5 times for this Driving Cycle
- Stable camshaft set-point moving by less than 1.125° CRK moving
- Camshaft position setpoint-actual > 5°CRK
- 600rpm < Engine speed < 5000rpm
- 20°C (68°F) < Engine oil temperature < 100°C (212°F)
|
| Threshold Value |
- Integral of Camshaft position setpoint - Camshaft position actual value > 150°CRK/sec.
|
| Diagnostic Time |
- Approx. 38~300 seconds depending on CAM deviation
|
| Fail-Safe |
|