Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2005 >> Elantra GLS, 4D Hatchback, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System >> Inspection Process For Trouble Symptoms >> Inspection Procedure 13 >> Inspection Procedures

Inspection Procedures

  1. Does the transaxle remain in 3rd gear with selector lever in position "D"?

    Yes:  Go to next step.

    No:  Go to step  5.

  2. Is backup power being supplied to the PCM?

    Yes:  Go to next step.

    No:  Go to step  4.

  3. Is power being supplied to the PCM?

    No 

    Yes:  Go to step  5

  4. Check the power supply circuit 
    1. Pay particular attention to an open circuit in the harness or poor connector.
    2. If there is a blown fuse, investigate why a short circuit has occurred and then replace the fuse.
  5. The PCM Input signal and selector lever position should match 
scientia non olet · About Mike's Workshop Manuals