Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2004 >> Elantra GLS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle System) >> Automatic Transaxle System >> Inspection Procedures For Diagnostic Trouble Codes >> DTC P0703: Stop Switch Short Circuit >> Inspection Procedures >> 2. Problem Verification

2. Problem Verification

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch ON.
  2. Using Hi-Scan (pro) monitor changing the stop switch output while the brake pedal released and pressed.

Is the stop switch normal? 

No: Go to next step.

Yes: Problem is intermittent or was repaired and engine control module memory was not cleared. Use the Hi-Scan (pro) to delete P0703 from memory in the PCM.

scientia non olet · About Mike's Workshop Manuals