Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2004 >> Elantra GLS, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System >> DTC Trouble Shooting Procedures >> DTC P0230: Fuel Pump Circuit Malfunction >> Inspection Procedures >> 6. Check For Short To Power In Harness

6. Check For Short To Power In Harness

  1. Turn ignition switch to ON position.
  2. Measure voltage between terminal 3 of the fuel pump relay harness connector and chassis ground.
    Fig 1: Checking Fuel Pump Relay Harness For Short To Power
    G00749271Courtesy of HYUNDAI MOTOR CO.
    • Specification: below 0.5V 

Is voltage within specification 

Yes: Proceed with ECM problem procedure.

No: Repair short to power in harness.