Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2004 >> Elantra GLS, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System >> DTC Trouble Shooting Procedures >> DTC P0265 Cylinder 2 - Injector Circuit High Input >> Inspection Procedures >> 6. Check For Open In Harness

6. Check For Open In Harness

  1. Turn ignition switch to OFF position and keep the injector and ECM connectors disconnected.
  2. Measure resistance between terminal 2 of the injector harness connector and 62 of the ECM harness connector C83.
    Fig 1: Checking Fuel Injector For Open Circuit
    G00749297Courtesy of HYUNDAI MOTOR CO.
    • Specification: below 1Ω 

Does resistance indicate continuity? 

Yes: Proceed with ECM problem procedure.

No: Repair open in harness.

scientia non olet · About Mike's Workshop Manuals