Fuel Pump Relay Test (Accent & Elantra)
- Locate and remove fuel pump relay, see FUEL PUMP RELAY LOCATION table. Using fused jumper wire, apply battery voltage to relay terminal No. 5 (component side). See Fig 1. Using second fused jumper wire, ground relay terminal No. 3 (component side). Go to next step.
- With relay energized, check for continuity between relay terminals No. 1 and 2 (component side). Continuity should be present until voltage is disconnected. If continuity is not as specified, replace fuel pump relay.
FUEL PUMP RELAY LOCATION
| Application | Fuel Pump Relay Location |
|---|---|
| Accent, Elantra, Santa Fe & Tiburon | Engine Compartment Fuse/Relay Box |
| Sonata & XG350 | Right Side Of Instrument Panel In Center Support, Under Radio |