Specifications & Procedures
NOTE:
Drive belt tension is controlled by an automatic tensioner on 2.7L V6 model.
BELT ADJUSTMENT SPECIFICATIONS
| Application | (1) Drive Belt Deflection - In. (mm) | |||
|---|---|---|---|---|
| A/C | ||||
| New Belt | 0.20-0.22 (5.0-5.5) | |||
| Used Belt | 0.24-0.28 (6.0-7.0) | |||
| Generator | ||||
| New Belt | 0.16-0.17 (4.0-4.4) | |||
| Used Belt | 0.20-0.22 (5.1-5.7) | |||
| P/S | ||||
| New Belt | 0.35-0.43 (8.8-11.0) | |||
| Used Belt | 0.49-0.56 (12.5-14.3) | |||
|
||||