Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2003 >> Santa Fe Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle System) >> Automatic Transaxle System >> Test Procedure >> Torque Converter Stall Test Judgement Results

Torque Converter Stall Test Judgement Results

WARNING: This page is about a different variant/trim than selected.
  1. Stall speed is too high in both D and R ranges
    • Low line pressure
    • Low & reverse brake slippage
  2. Stall speed is too high in D range only
    • Underdrive clutch slippage
  3. Stall speed is too high in R range only
    • Reverse clutch slippage
  4. Stall speed too low in both D and R ranges
    • Malfunction of torque converter
    • Insufficient engine output
Fig 1: Identifying Internal Transaxle Component Locations
G00791241Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About Mike's Workshop Manuals