Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2003 >> Santa Fe Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Cable Inspection >> Cable Adjustment

Cable Adjustment

  1. Assemble the cable to actuator and unit assembly.
  2. Tighten nut "b" after pulling the cable tightly.
  3. Back nut "b" off one turn.
  4. Tighten nut "a".
  5. Cable should have approximately 1mm of slack with the actuator and unit against the stop.
    Fig 1: Identifying Cable Adjustment Nuts
    G01001913Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About Mike's Workshop Manuals