Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2002 >> Santa Fe GLS, AWD >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Removal & Installation >> Electronic Time & Alarm Control System (ETACS) Control Module (Cm) >> Removal & Installation

Removal & Installation

  1. Disconnect the negative (-) battery terminal.
  2. Remove the lower crash panel.
  3. Remove the ETACS CM from the junction block and disconnect the connectors. See Fig 1 .
  4. To install, reverse removal procedure.
Fig 1: Removing ETACS CM From Junction Block
G00195495Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About Mike's Workshop Manuals