Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2010 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Instrument Panel Storage Compartment Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of I/P Compartment Assembly
    GM1251630Courtesy of GENERAL MOTORS CORP.
  1. Position the I/P compartment assembly to the I/P.
  2. Close and fully latch the I/P compartment door.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the fasteners retaining the I/P compartment assembly to the I/P. Tighten the fasteners to 3 N.m (27 lb in).
  4. Ensure the alignment of the door allows for proper operation.
scientia non olet · About Mike's Workshop Manuals