Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hummer >> 2010 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Wiring Systems And Power Management - Component Connector End Views) >> Component Connector End Views >> Vehicle Communications Interface Module (VCIM) X1 (UE1)

Vehicle Communications Interface Module (VCIM) X1 (UE1)

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Vehicle Communications Interface Module (VCIM) X1 (UE1)
GM697022Courtesy of GENERAL MOTORS CORP.
Vehicle Communications Interface Module (VCIM) X1 (UE1)

Pin Wire Circuit Function
1 - - Not Used
2 0.35 BN/WH 2517 Keypad Red LED Signal
3 0.35 YE/BK 2516 Keypad Green LED Signal
4-5 - - Not Used
6 0.35 L-GN/BK 2515 Keypad Control
7 0.8 BK/WH 1151 Ground
8-10 - - Not Used
11 0.35 D-GN/WH 2514 Keypad Signal
12-15 - - Not Used
16 0.8 OG 340 Battery Positive Voltage
Connector Part Information 
  • Harness: Instrument Panel
  • OEM: 15431362
  • Service: 15306351
  • Description: 16-Way F 040II (WH)
Terminal Part Information 
  • Pins: 2, 3, 6, 11
  • Terminal/Tray: 15355438/20
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 15315247/J-35616-12 (BU)
  • Pins: 7, 16
  • Terminal/Tray: 175266-5/15
  • Core/Insulation Crimp: K/K
  • Release Tool/Test Probe: 15315247/J-35616-16 (L-GN)